Home Profile Products Clients Contact us Feedback
     
   
     
 


TAP DENSITY METER

 
     
 

FEATURES :
 
Complies with USP and ASTM specifications
Supports USP II test method
Provided with glass sample holder of 100 ml cylinder
Easy snap fit arrangement for sample holder
Simultaneous rotating & tapping motion assures evenly packing of sample
Easy to operate
 
 

SMART TAP 40

   
 

 
  The bulk densities of powdered, granular or flaked material are dependent on the manner in which the powder is packed together. This parameter is very important in packing the material. During tapping of the sample, the smaller particles try to fit themselves in gaps of the larger particles and hence the total volume of the powder reduces.

Smart Tap 40, Tap density meter used to measure the tap density of any powder.

Sample is placed in the graduated glass cylinder of 100 ml capacity and is mounted on the platform designed to keep the same. Snap fit arrangement holds the cylinder in perfect position. Rotation of the platform while tapping helps to keep the powder level in flat position for reading. To ensure the free drop of the cylinder from the required height, the holder is provided with friction free bearing.

Before starting the tapping, initial volume and weight of the material is noted. After that the tapping counts is been set with the help of the counter from 1 to 9999 counts. Then tapping is started. After reaching the set counts, automatically the tapping stops and we have to note the final volume. With the help of the final volume and weight of the sample, the tap density is calculated.

SPECIFICATION :

 Test Method : USPI
 No. Of Stations : 1
 No of Strokes / min : 250+ 2 Drop s / min
 Drops height ( mm ) : 3+0.3
 Tap Count Range : 1-9999
 Sample Holder Capacity : 100ml readable up to 1ml
 Power Supply : 230V AC, 50Hz
 Dimensions : 26cm (L) x 26cm (D) x 20cm (H)
 Weight : 6 kg. ( Approximate )
 
 
 

Back

 
     

Design by Khoj Infotech & Hosted by Rajesh Kamble